Software:
The complete software is included
in the Download (including also
source code).
Documentation:
In the ZIP file below ...\Documentation\...
Make out files & HEX
file:
In the ZIP file below ...\OutFiles\...
Configuration:
-
The SW configuration can be done
via parameters/switches in the file "ArchRemConf.h".
-
Currently the values are adjusted
and tested for Atmel AT90S2313P and 7.3728 MHz crystal.
-
The parameter set can be switched
to a 4 MHz crystal by modifying the switch SWI_UC_CLOCK (e.g. = SWI_UC_CLOCK_4_0000MHZ).
-
Other crystal frequencies are
not implemented, but would be possible any time.
-
You can find the port, delay time
and AJB command configuration in the same file.